SK Adhesives

The Double Coated bonding tapes from 3M have pressure sensitive adhesive on both the sides to bond metal, paper and other surfaces. From architectural cladding, hosiery bag closure and folder assembly to 3M™ VHB™ Tapes that replaces rivets, 3M™ Removable / Repositionable Tapes and Scotch® ATG Adhesive Systems these products are used in diverse applications.

Please take a look at the products below.

Products

3M™ Adhesive Transfer Tapes

3M™ Adhesive Transfer Tapes are pressure-sensitive adhesive pre-applied to special release liner. Simply apply to a surface and peel off the liner. This leaves a clean, dry strip of acrylic adhesive for neat, precise joining of lightweight materials. There is a wide choice of adhesive properties to meet a variety of needs.

Foam Lamination
Double Coated Tissue Tapes are ideal for a variety of foam laminating applications where conformability is required.

Plasticiser Resistance
For bonding flexible vinyl applications such as door gaskets, 3M™ Adhesive Transfer Tape resists the effect of plasticisers that tend to migrate from the vinyl and weaken conventional adhesives.

3M™ Double Coated Tapes (Thin)

3M™ Double Coated Tapes (without foam) are adhesive-coated on both sides of paper, film or tissue. This increases the adhesive's dimensional stability for easy handling and application. The complete line features a variety of carriers and combination of adhesives to meet almost any need!

Your choice of properties include high temperature resistance, conformability to irregular surfaces, high initial adhesion, high shear strength, and more.

3M™ 300 LSE Laminating Adhesives

Only 3M™ 300 LSE (Low Surface Energy) Laminating Adhesives has both high peel strength and high sheer performance designed for bonding to LSE plastics, like polyethylene, polypropylene, polystrrene, powder coatings and lightly oiled metals.

An oven control panel backed with 3M™ High Performance Acrylic Adhesive 300LSE and 58# polycoated kraft liner.

3M™ Double Coated Foam Tapes

In bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area. Depending on the specific tape, the result is a bond line that seals, cushions and damps vibration, resists impact, withstands a wide temperature range, and provides good insulating qualities.

Choice of different foam carriers: urethane, vinyl, elastomeric, polyethylene, or acrylic.

Popular Products: 4026, 4032, 4082, 4084

3M™ Removable/ Repositionable Tapes

3M™ Removable/ Repositionable Tapes feature a relatively "permanent adhesive on one side of a film or tissue carrier and removable/ repositionable adhesive on the other side. With linered versions, you can initially join one side to a surface while the other side is covered with the liner, ready to be joined later to the second surface. Linerless versions are suited for bonding both surfaces at the same time. Different tapes in the line offer different levels of adhesion on each side of the carrier. You can join substrates that included glass, metals, wood, paper, painted surfaces, and plastics."

Popular Products: Reclosable Envelope Flaps, Removable Labels, Removable Carpeting, Pleated Paper Shades

3M™ VHB™ Tapes

3M™ Very High Bond (VHB) tapes have proven unmatched holding strength and durability where conventional mechanical fasteners such as screws, welds and bolts were previously used.

Attributes:

Fast, easy assembly, minimal application training.
No drilling, riveting, welding, screw fastening or clean-up
Eliminates grinding and finishing
Damps vibration and noise
Absorbs impact
Joins dissimilar materials
Compensates for differential thermal expansion or contractions
Lighter, less expensive materials
Uniform thickness
Diecutting available
Resists plasticiser migration
No investment in major equipment

Popular Products: 4950, 4941, 4910, 4914, 4955, 4936, 4952